ZhuZhou Better Tungsten Carbide Co., Ltd
Choose Zzbetter, Choose A Way To Success
Add to Cart
All Size PDC Cutters For Oil, waterwell Gas and Mining Drilling
Advantages of PDC cutters:
1. PDC button with excellent balance of impact resistance and abrasion resistance,for DTH bits, tricone bit, hammer bit, Dome/Spherical shape available.
2. Spherical Poly-crystalline Diamond Compact PDC cutter /PCD insert/PCD cutter/PDC insert/PDC blanks
3. Spherical PDC Mainly used for Roller bits, DTH bits, Button bits etc. percussion drilling
We can supply 1016,1118,1217,1318,1621,1926 etc as requested.
General Purpose PDC- High-value, mid-range performance, general purpose PDC cutters with high impact resistance. These cutters are used in a wide variety of applications, including:
-Oil and gas PDC bits as face, gauge, and backup cutters
-PDC bits for geothermal drilling
-PDC bits for water well drilling
-PDC bits for directional drilling
-Reaming tools
-Core bits
-Bearing elements
Other shapes of PDC cutters available:
PDC dome buttons
PDC parabolic buttons
PDC conical buttons
PDC Oviod buttons
PDC flat compact buttons
Sizes available of PDC inserts/PDC cutters/PDC buttons:
| Part Series | Part Specification | Description | ||||
| Diameter (mm) | Height (mm) | Polycrystalline table thickness (mm) | Polycrystalline chamfer (mm) | Carbide chamfer (mm) | ||
| LT (Extreme High Pressure PDC cutter) | 0808 | 8.0±0.03 | 8.0±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 |
| TC/TD (Hard formation, impact resistance and wear resistance) | 0808 | 8.0±0.03 | 8.0±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 |
| TRC(Medium formation, cutting part ) | 0808 | 8.0±0.03 | 8.0±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 |
| PC(Soft formation, Gauge protection) | 0808 | 8.0±0.03 | 8.0±0.1 | 2.1±0.2 | 0.40±0.1 | |
| Part Series | Part Specification | Description | ||||
| Diameter (mm) | Height (mm) | Polycrystalline table thickness (mm) | Polycrystalline chamfer (mm) | Carbide chamfer (mm) | ||
| LT (Extreme High Pressure PDC cutter) | 1308 | 13.44±0.03 | 8.0±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 |
| 1313 | 13.44±0.03 | 13.2±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| TC/TD (Hard formation, impact resistance and wear resistance) | 1308 | 13.44±0.03 | 8.0±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 |
| 1313 | 13.44±0.03 | 13.2±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| TRC(Medium formation, cutting part ) | 1308 | 13.44±0.03 | 8.0±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 |
| 1313 | 13.44±0.03 | 13.2±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| PC(Soft formation, Gauge protection) | 1308 | 13.44±0.03 | 8.0±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 |
| 1313 | 13.44±0.03 | 13.2±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| Part Series | Part Specification | Description | ||||
| Diameter (mm) | Height (mm) | Polycrystalline table thickness (mm) | Polycrystalline chamfer (mm) | Carbide chamfer (mm) | ||
| LT (Extreme High Pressure PDC cutter) | 1608 | 15.88±0.03 | 8.0±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 |
| 1613 | 15.88±0.03 | 13.2±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| 1616 | 15.88±0.03 | 16.3±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| TC/TD (Hard formation, impact resistance and wear resistance) | 1608 | 15.88±0.03 | 8.0±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 |
| 1613 | 15.88±0.03 | 13.2±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| 1616 | 15.88±0.03 | 16.3±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| TRC(Medium formation, cutting part ) | 1608 | 15.88±0.03 | 8.0±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 |
| 1613 | 15.88±0.03 | 13.2±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| 1616 | 15.88±0.03 | 16.3±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| PC(Soft formation, Gauge protection) | 1608 | 15.88±0.03 | 8.0±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 |
| 1613 | 15.88±0.03 | 13.2±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| 1616 | 15.88±0.03 | 16.3±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| Part Series | Part Specification | Description | ||||
| Diameter (mm) | Height (mm) | Polycrystalline table thickness (mm) | Polycrystalline chamfer (mm) | Carbide chamfer (mm) | ||
| LT (Extreme High Pressure PDC cutter) | 1913 | 19.05±0.03 | 13.2±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 |
| 1916 | 19.05±0.03 | 16.3±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| 1919 | 19.05±0.03 | 19.0±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| TC/TD (Hard formation, impact resistance and wear resistance) | 1913 | 19.05±0.03 | 13.2±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 |
| 1916 | 19.05±0.03 | 16.3±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| 1919 | 19.05±0.03 | 19.0±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| TRC(Medium formation, cutting part ) | 1913 | 19.05±0.03 | 13.2±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 |
| 1916 | 19.05±0.03 | 16.3±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| 1919 | 19.05±0.03 | 19.0±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| PC(Soft formation, Gauge protection) | 1913 | 19.05±0.03 | 13.2±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 |
| 1916 | 19.05±0.03 | 16.3±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
| 1919 | 19.05±0.03 | 19.0±0.1 | 2.1±0.2 | 0.40±0.1 | 0.76±0.25 | |
